Increasing Coverage

For All Cellular Communications

Works on all carriers:

roveramp hiboost f27 5s amplifier medium v2

Industial 100K Tri-Band Amp

The Industrial 100K Tri-Band Amplifier is a full duplex mobile communication repeater. It is the perfect solution for providing a wireless improvement of cellular reception in a high-rise building, basement, hotel, shopping mall, tunnel, etc. A single signal repeater can boost indoor coverage over up to 100,000 square feet of indoor spaces.

It is designed to improve the signal quality of an area by receiving signal from outside from all USA cellular service providers such as AT&T, Sprint, Verizon, T-Mobile and from Canadian mobile service providers such as Bell Mobility, Telus, and Rogers Wireless. It then amplifies that exterior signal from the base station using the cellular repeater or amplifier. Thereafter, it channels that signal to all areas of need indoors.

Features and Benefits

Boosts Talk & Text and 4G Data Transfer Speeds

Strongest cell phone signal booster for Large Apartment Buildings, Malls, and Office Buildings up to 100,000 sq. ft.

Up to +83 Decibel Gain

All 2G, 3G and 4G standards are supported

Supports up to 200 users simultaneously

LCD indicator for all controls

Self-oscillation protection

3 Year Warranty

Good heat dissipation for longevity

Wide power supply range and lower power consumption

Streamlined design

Easy for site survey, system installation and maintenance

Compatible with all cell devices

Compatible with all cell phone service providers

Designed for installations by FCC licensees and qualified certified installers.

Specifications

Upload Frequency Range: 698-716 / 776-787 / 824-849 / 1850-1910 / 1710-1755.
Download Frequency Range: 728-746 / 746-757 / 869-894 / 1930-1990 / 2110-2155.
Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards.
Maximum Gain: Uplink 80 dB/ Downlink 83 dB.
Maximum Output Power: Uplink 20 dBm/ Downlink 27 dBm.
MGC (Step Attenuation): 31 dB/ 1 dB Step.
Automatic Gain Control: 31 dB.
V.S.W.R.: ≤ 2dB.
I/O Port: N-Female.
Impedance: 50 ohm.
Environment Conditions: IP40.
Dimensions: 11 x 15 x 7.2 inches or 280 x 400 x 53 millimeters.
Weight: 17.6 Lbs. or 8 Kg.
Power Supply: Input AC 100~240V, 50/60Hz, Output DC 12V / 7A.

Data Sheets/User Guide

User Guide

DataSheet

Warning

This is NOT a CONSUMER device.

It is designated for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.

For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly